AT THE HEART OF THE HOME
25kW to domestic hot water (DWH) output with a DHW flow rate of 10.2 litres through 35oC rise
- SEDBUK A Rate
- 5 Year Guarantee
- Innovative Low Energy Consumption
- Large Digital Visible Temperature Adjustment
- Exceptionally Quiet in Operation
- User Friendly Touch Controls, Simple and Easy to Use
- Integral Valve Kit Eliminates Unsightly Valves Outside the Boiler
- Compact in Size – 700mm High, 400mm Wide and 300mm Deep
- Built-in Deep Seal Condensation Trap Designed to Reduce Nuisance Freezing in Winter
- Flexible Condensation Pipe Conveniently Located After the Trap
- Manual and Automatic Air Vent Allows Air Out of the System More Easily When Commissioning
- Brass and Premium Branded Components for Lasting Quality
- The High Density Foam Lining of the WH80 Keeps Heat In and Allows for Quiet Operation
- Removable Side Panels
- Built-in Automatic By-pass
- Low NOx Class 5 Meets New Stringent Building Codes
- Solar Compatible
- Minimum Low Power of 3.6kW Further Reduces Energy Cost
- Greater Energy Saving Through the Appliance Modulating
- Lightweight Design to Aid Installation
Flue Options
The new WH80 can be fitted with either a 100mm standard (concentric), a 125mm flue duct or a twin (eccentric) flue duct, which can be installed either vertical or horizontal, depending on the customer’s requirement.
A one metre standard horizontal flue kit is supplied separately; this can extend to 8 metres if required, or 13 metres vertical (maximum without bends). Alternatively there is a 125mm (concentric flue system that allows greater flexibility (26 metres)). Eccentric flue ducting is perfect for covering long distances and when used with a special connector this can be extended up to 43 metres air intake/exhaust.
See installation manual for all flue options.
| Part | Description Flue 60/100 | Part No |
| 1 | 1 metre horizontal flue kit | PR5023016 |
| 2 | Straight flue header/Sample Point | PR5094110A |
| 3 | 1 metre high plume kit | TER110101 |
| 4 | 1 metre flue extension | PRFE |
| 5 | 45o in line flue bend | PR45FBI |
| 6 | 90o in line flue bend | PR90FBI |
| 7 | Flashing sleeve/plate | TEG060050 |
| 8 | 1 metre vertical terminal | TER110200 |
| 9 | Combi ridge terminal kit | TER090100 |
| 10 | 90o flue exhaust deflection bend | CUR110100 |
| 11 | 45o flue exhaust deflection bend | CUR110050 |
Easily Installed Neat Connections
Quality
Built to exacting ISO 9001 standards using quality components, all our boilers carry the European CE mark. Each Ravenheat appliance undergoes rigorous testing and operating procedure before being carefully packed for maximum protection, ready to leave our factory.
We only use high quality components from leading industry manufacturers: Honeywell, Grundfos and Giannoni.
*Image for demonstration purposes only.
Boiler Specification
| Model | WH80(T) | |
| Central Heating Max Output (Adjustable Modulation) | kW | 3.6 - 21.4 |
| Domestic Hot Water Max Output (Adjustable Modulation) | kW | 3.6 - 25.4 |
| Domestic Hot Water | ||
| Flow Rate Raised 30oC△t | I/Min | 11.9 |
| Inlet Temperature 35oC△t | I/Min | 10.2 |
| Expansion Vessel | 1 | 8L |
| Maximum Central Heating Temperature | oC | 80 |
| Connection | ||
| Heating Flow & Return Compression | mm | 22 |
| Gas Connection | mm | 15 |
| Domestic Supply (Cold) Compression | mm | 15 |
| Domestic Supply (Hot) Copper | mm | 15 |
| Condensing Pipe ¾ Push Fit Overflow Pipe | ||
| Flue Size | mm | 100 |
| Electrical Mains Supply | 230v 50Hz Fused 3amp |
|
| Nat Gas Band A 2005/2009 LPG Band A 2005/2009 | % % | 90.3/88.9 91.9/89.9 |
| Nox Class (lowest possible level) Available with or without timer | 5 |
THE INSIDE STORY
Performance tested technology, including brass and premium branded components, featuring the easy release control panel allowing easy access for servicing make the WH80 a sure-fire hit with installers.
Technical After-Sales Service
The White Boiler Company has a technical helpline based in Leeds. Service engineers and their customers have the satisfaction of knowing they will receive advice from one of our technical assistants and that one of our own technicians is on hand should an on-site visit be required.
The White Boiler Company only uses its own highly qualified technicians, thereby, ensuring that highest quality and most reliable customer care.
